0948279988
Products  Rolling machine, experimental extrusion machine

heat press machine

Model: heat press machine
Producer: CHAREONTUT-Thailan
Giá: Contact
Compressor Model: PR1D-W300L350-PM-HMI Manufacturer: Chareotut-Thailand Origin: Thailand

Ứng dụng sản phẩm

  • Compressor with strong structure with 4 support rods.
  • Compression plate made of hard chrome plated steel.
  • Suitable for plastic and/or rubber.
  • Automatic/manual working modes.
  • Alarm system by setting alarm number and alarm time via touch screen controller to avoid air trapped inside polymer.
  • Safety door, safety switch, and safety guard. The hydraulic system cannot operate when the front door is opened.
  • The machine is installed with electrical control panel including main switch, temperature controller, PLC, touch screen, timer, up and down stop switch and emergency stop switch.
  • The pressure is easily adjusted by two electric pressure switches: one lower one for preheating and one higher for pressing with a pressure gauge.
  • Electronic valve to control the up and down direction of the compression roller.
  • Hydraulic components are easy to open for quick maintenance
  • Overpressure protection safety valve.
  • Pressure relief system to remove mold in case of power failure.
  • Pressure holding system to stop the pump motor to prolong the life of the pressure pump, save energy and reduce noise.
  • Automatic pressure holding system to maintain working pressure.
  • Digital timer with indicator light and buzzer;
  • The press plate will be lowered automatically as time elapses.
  • The front table for the mold is at the same level of the lower platen.

Thông số kỹ thuật

  • Heating plate size: 300 x 350 mm
  • Number of heating plates: 2 plates, separate temperature setting
  • Length of piston stroke: 200 mm
  • Maximum heating temperature: 250oC (Personal PID digital temperature setting and temperature controller)
  • Pressing system: hydraulic
  • Force/Pressure: 55 tons at 2,500 psi
  • Electric heating system
  • Main motor: 5.5kW with overheat protection
  • Power supply: 3 phase/380V/50Hz
  • Number of times to run the press: 1 time/day

Tiêu chuẩn

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Twin-Screw Extruder
Model: CT Twin-Screw Extruder
Producer: CHAREONTUT-Thailan
  • The Chareontut 2-screw extruder uses plastic extrusion in the laboratory.
Buy product
CT Two-Roll Mill
Model: CT Two-Roll Mill
Producer: CHAREONTUT-Thailan
  • Used to roll raw plastic or rubber into thin sheets according to laboratory standards
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube