Ứng dụng sản phẩm
- Rain Tester, widely applied to labs to test the penetration resistance performance of fabrics or composites under different intensities of water impact(by stimulating the rain-dropping gravity impact via different water levels inside the tube, pre-determined according to different standards). Simulating rain horizontally impacts fabric samples mounted vertically in a stainless steel bath. Measure the absorbent paper of the sample both before and after the test. The rain is formed by a column of water, which can be adjusted from 600mm to 2400mm.
Thông số kỹ thuật
- Test size: 200x200mm
- Sample clamp width: 152mm
- Middle clamping distance: 165mm(GB/T 23321),155mm(AATCC 35, ISO 22958)
- Sample clamp size: 178 * 279 mm
- Faucet diameter: 0.99 ± 0.013mm
- Nozzle distance between sample: 305mm
- Weight: 60kg
- Size: 650mm x 800mm x 2800mm
Tiêu chuẩn
ATCC 35 |
ISO22958 |
GB/T 23321 |
Video
Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88
⇒ Or leave a message and we will call you directly. Thank you very much!