0948279988
Products  Testing Equipments footwear industry

Ankle Shock Absorption Tester

Model: H082
Producer: HiLAB-Portugal
Giá: Contact
The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Ứng dụng sản phẩm

  • Purpose – Assess the capacity of impact attenuation on safety footwear, protective gloves, motorcyclists protective clothing and motorcyclist’s chest protector

Thông số kỹ thuật

Voltage (VAC) 230 ± 10
Power (W) 400
Dimensions (W x D x H) (mm) 650 x 550 x 1750
Net Weight (including base) (Kg) 580
Note: Is necessary compressed air at 5 bars (minimum)

Tiêu chuẩn

  • EN ISO 20344;
  • EN 13594;
  • EN 1621-1;
  • EN 1621-2;
  • EN 1621-3

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Martindale Abrasion Tester with 9 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.
Buy product
BATA BELT Flexing Tester
Model: H013
Producer: HiLAB-Portugal
  • Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Rotating Rub Fastness Tester
Model: H065
Producer: HiLAB-Portugal
  • Machine is supplied complete with cutting die to cut the samples.
Buy product
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Lace to Lace Abrasion Tester with 6 stations
Model: H067
Producer: HiLAB-Portugal
  • Shoe lace-to-lace abrasion tester, it is used to determine the abrasion resistance of shoelaces by abrasion...
Buy product
BENNEWART Flexometer
Model: H011
Producer: HiLAB-Portugal
  •  Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.
Buy product
Circular Blade Cutting Resistance Tester
Model: H071
Producer: HiLAB-Portugal
  • The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...
Buy product
Electrical Conductivity Tester
Model: H077
Producer: HiLAB-Portugal
  • Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.
Buy product
Leather Grain Crack Tester
Model: H076
Producer: HiLAB-Portugal
  • Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...
Buy product
Longitudinal/Torsional Stiffness of insole back parts and shanks
Model: H030
Producer: HiLAB-Portugal
  • Determine the stiffness of steel shanks, used as reinforcement in footwear 
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Vamp Flexometer with 12 stations
Model: H010
Producer: HiLAB-Portugal
  • Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube