0948279988
Products  Testing Equipments footwear industry

BATA BELT Flexing Tester

Model: H013
Producer: HiLAB-Portugal
Giá: Contact
Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Ứng dụng sản phẩm

  • After cutting off the heel, the sole is sewn or glued on the belt.
  • Depending on the size of the base to be tested, several bases can be tested at the same time.
  • At the end of the number of cycles, the machine will automatically stop and the sole must be inspected for any cracking.
  • The machine is fully supplied with 3 bending columns Ø 60; 90; 120 mm, selected according to the type and stiffness of the base
  • All machine parts that come into contact with the test sample are made from stainless steel, aluminum or engineering plastics.

Thông số kỹ thuật

Tiêu chuẩn

  • ISO 16177;
  • SATRA TM133

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Elastics Repeated Extension Tester
Model: H017
Producer: HiLAB-Portugal
  • Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Longitudinal/Torsional Stiffness of insole back parts and shanks
Model: H030
Producer: HiLAB-Portugal
  • Determine the stiffness of steel shanks, used as reinforcement in footwear 
Buy product
BENNEWART Flexometer
Model: H011
Producer: HiLAB-Portugal
  •  Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.
Buy product
Lace to Eyelet Abrasion Tester with 6 stations
Model: H068
Producer: HiLAB-Portugal
  • Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.
Buy product
Rotating Rub Fastness Tester
Model: H065
Producer: HiLAB-Portugal
  • Machine is supplied complete with cutting die to cut the samples.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Electrical Conductivity Tester
Model: H077
Producer: HiLAB-Portugal
  • Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.
Buy product
BALLY Penetrometer
Model: H033
Producer: HiLAB-Portugal
  • The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...
Buy product
Martindale Abrasion Tester with 9 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube