0948279988
Products  Testing Equipments footwear industry

Circular Blade Cutting Resistance Tester

Model: H071
Producer: HiLAB-Portugal
Giá: Contact
The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...

Ứng dụng sản phẩm

  • Purpose – Assess the resistance of upper and glove materials to be cut by blade.

Thông số kỹ thuật

Tiêu chuẩn

  • EN ISO 20344:5.23;
  • ISO 23388:6.2;
  • EN 388:6.2

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Water Vapour Absorption Tester
Model: H052
Producer: HiLAB-Portugal
  • The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Whole Shoe Flexometer with 4 stations
Model: H009
Producer: HiLAB-Portugal
  • Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking
Buy product
Wear and Corrosion Apparatus
Model: H063
Producer: HiLAB-Portugal
  • Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Electrical Conductivity Tester
Model: H077
Producer: HiLAB-Portugal
  • Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Elastics Repeated Extension Tester
Model: H017
Producer: HiLAB-Portugal
  • Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.
Buy product
Toe Caps Impact Tester
Model: H081
Producer: HiLAB-Portugal
  • Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
  • Changing tools (striker or clamping device) is a very easy and quick operation
Buy product
Rubber abrasive machine-No.151
Model: Rubber abrasive machine-No.151
Producer: TESTEX-China
  • DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Vamp Flexometer with 12 stations
Model: H010
Producer: HiLAB-Portugal
  • Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube