Lace to Eyelet Abrasion Tester with 6 stations

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Thông số kỹ thuật

The machine has six stations. Each station has an independent counter that record the number of cycles made for each lace.
When one lace does not resist till the number of cycles imposed in the main counter, the weight falls over a stop system and the individual counter stops recording the number of cycles made that lace.
If all laces are broken before the total of cycles imposed in the main counter, machine stops, and individual results are showed.
The machine has a tactile terminal through which operator can define test parameters and record the test results.
All pieces of this machine that are contacting with test sample are made from stainless steel or aluminum to avoid oxidation.

Tiêu chuẩn

BS 5131:3.6;
TM 93.

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Dynamic Water-Resistance Tester

Model: H054

Producer: HiLAB-Portugal

The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product

Leakproofness Tester

Model: H055

Producer: HiLAB-Portugal

Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...

Buy product

Circular Blade Cutting Resistance Tester

Model: H071

Producer: HiLAB-Portugal

The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

BATA BELT Flexing Tester

Model: H013

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Buy product

Martindale Abrasion Tester with 9 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.

Buy product

Rub Fastness Tester with 2 stations

Model: H064

Producer: HiLAB-Portugal

Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.

Buy product

Whole Shoe Flexometer in water

Model: H015

Producer: HiLAB-Portugal

This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.

Buy product

Water Vapour Permeability Tester

Model: H050

Producer: HiLAB-Portugal

The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...

Buy product

Thickness Measuring Gauge for leather

Model: H046/1

Producer: HiLAB-Portugal

Used to measure the thickness of leather panels, measure the thickness of details in leather products to calculate the increase or decrease in product thickness.

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Slip Resistance Tester

Model: H080

Producer: HiLAB-Portugal

A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product