0948279988
Products  Testing Equipments footwear industry

Dynamic Water-Resistance Tester

Model: H054
Producer: HiLAB-Portugal
Giá: Contact
The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.

Ứng dụng sản phẩm

  • Determination of dynamic water-resistance of sole leather and water absorption and desorption of insole and insock materials, according EN ISO 20344:7.2; EN ISO 22649; EN ISO 5404; TM220.

Thông số kỹ thuật

Rule:
  • The test specimen is placed on a wet soleplate and subjected to repeated bending under a certain pressure (in a similar manner to a shoe sole during walking).
  • The device allows determining infiltration time, water absorption desorption rate, infiltration area and water absorption rate as required.
  • The system essentially consists of a rough-surfaced platform, a roller with a sample clamping system, a means of pressing the platform against the roller, a cracking motion of the roller, a water supply system and a detection system. electronic.
  • With this system it is possible to perform all tests according to the above mentioned standards.
  • All test parameters and conditions are easily set via the touch screen. This facility allows the creation of test programs, according to test standards
Very important:
  •  All parts of the device that come into contact with the sample and water are made of aluminum and stainless steel to avoid oxidation.

Tiêu chuẩn

  • EN ISO 20344:7.2;
  • EN ISO 22649;
  • EN ISO 5404;
  • TM220.

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Electrical Conductivity Tester
Model: H077
Producer: HiLAB-Portugal
  • Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.
Buy product
Water Vapour Absorption Tester
Model: H052
Producer: HiLAB-Portugal
  • The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
Wear and Corrosion Apparatus
Model: H063
Producer: HiLAB-Portugal
  • Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...
Buy product
Blade Cutting Resistance Tester
Model: H073
Producer: HiLAB-Portugal
  • The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...
Buy product
Circular Blade Cutting Resistance Tester
Model: H071
Producer: HiLAB-Portugal
  • The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...
Buy product
Leather Grain Crack Tester
Model: H076
Producer: HiLAB-Portugal
  • Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Rubber abrasive machine-No.151
Model: Rubber abrasive machine-No.151
Producer: TESTEX-China
  • DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.
Buy product
ROSS Flexometer
Model: H014
Producer: HiLAB-Portugal
  • Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.
Buy product
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
BALLY Penetrometer
Model: H033
Producer: HiLAB-Portugal
  • The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...
Buy product
Rub Fastness Tester with 2 stations
Model: H064
Producer: HiLAB-Portugal
  • Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube