Leakproofness Tester

Martindale Abrasion Tester with 4 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.

Buy product

Heel Fatigue Tester

Model: H084

Producer: HiLAB-Portugal

The machine is controlled by a touch screen, through which is inserted the test parameters.
An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.

Buy product

Whole Shoe Flexometer in water

Model: H015

Producer: HiLAB-Portugal

This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product

Slip Resistance Tester

Model: H080

Producer: HiLAB-Portugal

A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.

Buy product

Dynamic Water-Resistance Tester

Model: H054

Producer: HiLAB-Portugal

The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Chainsaw Cutting Tester

Model: H070

Producer: HiLAB-Portugal

Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Rubber abrasive machine-No.151

Model: Rubber abrasive machine-No.151

Producer: TESTEX-China

DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.

Buy product

Lace to Lace Abrasion Tester with 6 stations

Model: H067

Producer: HiLAB-Portugal

Shoe lace-to-lace abrasion tester, it is used to determine the abrasion resistance of shoelaces by abrasion...

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Water Vapour Absorption Tester

Model: H052

Producer: HiLAB-Portugal

The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

BALLY Penetrometer

Model: H033

Producer: HiLAB-Portugal

The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...

Buy product

Leakproofness Tester

Ứng dụng sản phẩm

Thông số kỹ thuật

Tiêu chuẩn

Video