BENNEWART Flexometer

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

Our “Bennewart” base bending machine has three stations, each with fixed and mobile sample clamps.
To facilitate specimen installation, the clamps have an automatic flat position and an overall bend position to allow incisions to be made and cut measurements to be made.
These positions can be selected via the touch screen.
The touch screen allows access to several utilities such as inserting total number of test cycles, inserting test steps and easily verifying or calibrating routines.
All parts of the machine that come into contact with the test sample are made from stainless steel or aluminum and are sturdy enough to avoid bending during testing.
The current model is to perform testing at room temperature. Cold temperature testing must be performed on our model H011C, which has a cold chamber capable of maintaining continuous testing temperatures down to minus 20 ˚C.

Thông số kỹ thuật

Tiêu chuẩn

EN ISO 20344:8.6;
ISO 17707

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Lace to Lace Abrasion Tester with 6 stations

Model: H067

Producer: HiLAB-Portugal

Shoe lace-to-lace abrasion tester, it is used to determine the abrasion resistance of shoelaces by abrasion...

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Toe Caps Impact Tester

Model: H081

Producer: HiLAB-Portugal

Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
Changing tools (striker or clamping device) is a very easy and quick operation

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Blade Cutting Resistance Tester

Model: H073

Producer: HiLAB-Portugal

The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...

Buy product

Whole Shoe Flexometer with 4 stations

Model: H009

Producer: HiLAB-Portugal

Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

Martindale Abrasion Tester with 9 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Martindale Abrasion Tester with 4 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product

Leakproofness Tester

Model: H055

Producer: HiLAB-Portugal

Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...

Buy product

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product

Heat Insulation Tester

Model: H028

Producer: HiLAB-Portugal

This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.

Buy product