0948279988
Products  Testing Equipments footwear industry

Chainsaw Cutting Tester

Model: H070
Producer: HiLAB-Portugal
Giá: Contact
Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.

Ứng dụng sản phẩm

  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.

Thông số kỹ thuật

Tiêu chuẩn

  • ISO 11393-1
  • ISO 11393-2
  • ISO 11393-4
  • ISO 11393-5 
  • ISO 11393-6

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
Circular Blade Cutting Resistance Tester
Model: H071
Producer: HiLAB-Portugal
  • The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Longitudinal/Torsional Stiffness of insole back parts and shanks
Model: H030
Producer: HiLAB-Portugal
  • Determine the stiffness of steel shanks, used as reinforcement in footwear 
Buy product
ROSS Flexometer
Model: H014
Producer: HiLAB-Portugal
  • Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Water Vapour Absorption Tester
Model: H052
Producer: HiLAB-Portugal
  • The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Rub Fastness Tester with 2 stations
Model: H064
Producer: HiLAB-Portugal
  • Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.
Buy product
BATA BELT Flexing Tester
Model: H013
Producer: HiLAB-Portugal
  • Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133
Buy product
Rubber abrasive machine-No.151
Model: Rubber abrasive machine-No.151
Producer: TESTEX-China
  • DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube