Heat Insulation Tester

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product

Toe Caps Impact Tester

Model: H081

Producer: HiLAB-Portugal

Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
Changing tools (striker or clamping device) is a very easy and quick operation

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Water Vapour Absorption Tester

Model: H052

Producer: HiLAB-Portugal

The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.

Buy product

Electronic Lastometer

Model: H020

Producer: HiLAB-Portugal

Used to analyze the static properties of tensile and compression, bending, shearing, peeling, tearing, retaining, retarding, reciprocating, etc.

Buy product

Slip Resistance Tester

Model: H080

Producer: HiLAB-Portugal

A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.

Buy product

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Water Vapour Permeability Tester

Model: H050

Producer: HiLAB-Portugal

The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Rubber abrasive machine-No.151

Model: Rubber abrasive machine-No.151

Producer: TESTEX-China

DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.

Buy product

BATA BELT Flexing Tester

Model: H013

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Martindale Abrasion Tester with 9 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.

Buy product

Heat Insulation Tester

Ứng dụng sản phẩm

Thông số kỹ thuật

Tiêu chuẩn

Video