Martindale Abrasion Tester with 9 stations

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

The machine is used to determine the abrasion and knotting resistance of fabrics using the Martindale method
The machine is suitable for testing woven and knitted fabrics, fabrics, and non-woven fabrics
Martindale's fabric is available with 9
The Martindale Abrasion Test was developed primarily to evaluate the abrasion resistance of wool and textile fabrics and is not suitable for fabrics with surface coating.
The Martindale is equipped with an advanced 7” Touchscreen controller that provides the operator with an easy-to-read display and simple controls to operate the machine. The emergency stop switch is located for ease of use if the operator needs to stop the machine quickly.
Martindale is capable of operating within 24 hours. The test time is calculated from when the machine started and the current time. For the calculation to be accurate, it is necessary to set the correct time
Martindale can be configured to perform tests requiring different wear patterns. The equipment delivered is set up for standard abrasion testin

Thông số kỹ thuật

The main parts of the equipment are made of stainless steel, aluminum, and technical plastics, to avoid oxidation, even in wet tests.
The quality of the materials and their finish ensures uniform, smooth and no vibration movement of the holder guide plate.

Tiêu chuẩn

ISO 12947-1;
EN ISO 5470-2;
EN ISO 20344:6.12;
EN ISO 17704;
EN ISO 12945-2.

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

BALLY Penetrometer

Model: H033

Producer: HiLAB-Portugal

The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...

Buy product

Martindale Abrasion Tester with 4 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.

Buy product

Wear and Corrosion Apparatus

Model: H063

Producer: HiLAB-Portugal

Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...

Buy product

Heel Fatigue Tester

Model: H084

Producer: HiLAB-Portugal

The machine is controlled by a touch screen, through which is inserted the test parameters.
An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

Whole Shoe Flexometer in water

Model: H015

Producer: HiLAB-Portugal

This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.

Buy product

Electronic Lastometer

Model: H020

Producer: HiLAB-Portugal

Used to analyze the static properties of tensile and compression, bending, shearing, peeling, tearing, retaining, retarding, reciprocating, etc.

Buy product

Slip Resistance Tester

Model: H080

Producer: HiLAB-Portugal

A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.

Buy product

Rubber abrasive machine-No.151

Model: Rubber abrasive machine-No.151

Producer: TESTEX-China

DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Circular Blade Cutting Resistance Tester

Model: H071

Producer: HiLAB-Portugal

The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Blade Cutting Resistance Tester

Model: H073

Producer: HiLAB-Portugal

The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product