TABER Abrasion Tester

Martindale Abrasion Tester with 4 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product

Dynamic Water-Resistance Tester

Model: H054

Producer: HiLAB-Portugal

The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Water Vapour Absorption Tester

Model: H052

Producer: HiLAB-Portugal

The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.

Buy product

Whole Shoe Flexometer with 4 stations

Model: H009

Producer: HiLAB-Portugal

Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking

Buy product

Circular Blade Cutting Resistance Tester

Model: H071

Producer: HiLAB-Portugal

The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Martindale Abrasion Tester with 9 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.

Buy product

Rubber abrasive machine-No.151

Model: Rubber abrasive machine-No.151

Producer: TESTEX-China

DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.

Buy product

Electronic Lastometer

Model: H020

Producer: HiLAB-Portugal

Used to analyze the static properties of tensile and compression, bending, shearing, peeling, tearing, retaining, retarding, reciprocating, etc.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

BALLY Penetrometer

Model: H033

Producer: HiLAB-Portugal

The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...

Buy product