Slip Resistance Tester

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

Purpose: Determining the coefficient of friction between footwear, its components, and floorings, according EN ISO 13287; EN ISO 24267; EN ISO 20344; ASTM F2913; SATRA TM144.

Thông số kỹ thuật

A special control and data acquisition system designed for this application allows creating and storing test methods.
The calculations are automatically made and can be verified based on individual values acquired by the system.
The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report.
As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
The access to the test program, test results and all configurations is made through a three-level permission access. “User”, “Admin” and “Super Admin”.
Software was specially designed and developed for this application to make it very easy to perform the testing procedure

Standard configuration of the equipment:
The equipment is delivered with the following items:

Tiêu chuẩn

EN ISO 13287;
EN ISO 24267;
EN ISO 20344;
ASTM F2913;
SATRA TM144.

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Whole Shoe Flexometer with 4 stations

Model: H009

Producer: HiLAB-Portugal

Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Whole Shoe Flexometer in water

Model: H015

Producer: HiLAB-Portugal

This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.

Buy product

Heel Fatigue Tester

Model: H084

Producer: HiLAB-Portugal

The machine is controlled by a touch screen, through which is inserted the test parameters.
An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

Thickness Measuring Gauge for leather

Model: H046/1

Producer: HiLAB-Portugal

Used to measure the thickness of leather panels, measure the thickness of details in leather products to calculate the increase or decrease in product thickness.

Buy product

Wear and Corrosion Apparatus

Model: H063

Producer: HiLAB-Portugal

Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product

Leakproofness Tester

Model: H055

Producer: HiLAB-Portugal

Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

BATA BELT Flexing Tester

Model: H013

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Buy product

Toe Caps Impact Tester

Model: H081

Producer: HiLAB-Portugal

Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
Changing tools (striker or clamping device) is a very easy and quick operation

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product