0948279988
Products  Testing Equipments footwear industry

Elastics Repeated Extension Tester

Model: H017
Producer: HiLAB-Portugal
Giá: Contact
Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to ...

Ứng dụng sản phẩm

  • Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Thông số kỹ thuật

  • The command of this equipment is entirely made through a touch screen in which runs a specific program that allows to the operator set all parameters of the test, namely stroke length and number of cycles (partial and total).
  • With these facilities it isn´t necessary adjust any mechanical parts.
  • The installation of samples is very easy because start position is always maintained by the system that assures that stop position is always coincident with start position. To assess the damage of the elastics, there is an option to move the moving clamp to the total stretched position.
  • All pieces of this machine that are contacting with test sample are made from stainless steel or aluminium and strong enough to avoid bend during test.
  • This machine, as all our machines, are projected and produced according all international safety regulations.

Tiêu chuẩn

  • EN ISO 10768; SATRA TM103.

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
ROSS Flexometer
Model: H014
Producer: HiLAB-Portugal
  • Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.
Buy product
BALLY Penetrometer
Model: H033
Producer: HiLAB-Portugal
  • The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Electrical Conductivity Tester
Model: H077
Producer: HiLAB-Portugal
  • Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Vamp Flexometer with 12 stations
Model: H010
Producer: HiLAB-Portugal
  • Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25
Buy product
TABER Abrasion Tester
Model: H061
Producer: HiLAB-Portugal
  • Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Blade Cutting Resistance Tester
Model: H073
Producer: HiLAB-Portugal
  • The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Longitudinal/Torsional Stiffness of insole back parts and shanks
Model: H030
Producer: HiLAB-Portugal
  • Determine the stiffness of steel shanks, used as reinforcement in footwear 
Buy product
Toe Caps Impact Tester
Model: H081
Producer: HiLAB-Portugal
  • Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
  • Changing tools (striker or clamping device) is a very easy and quick operation
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
BATA BELT Flexing Tester
Model: H013
Producer: HiLAB-Portugal
  • Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133
Buy product
Leakproofness Tester
Model: H055
Producer: HiLAB-Portugal
  • Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube