0948279988
Products  Testing Equipments footwear industry

Heat Resistance Tester

Model: H027
Producer: HiLAB-Portugal
Giá: Contact
The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Ứng dụng sản phẩm

  • Assess the ability of the finish of shoemaking materials to withstand the heat involved in various shoemaking operations, according to EN ISO 20344:8.9; SATRA TM49

Thông số kỹ thuật

  • The main parts of this machine are made of stainless steel, except heating block that is made in cooper.

Tiêu chuẩn

  • EN ISO 20344:8.9;
  • SATRA TM49

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Blade Cutting Resistance Tester
Model: H073
Producer: HiLAB-Portugal
  • The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
TABER Abrasion Tester
Model: H061
Producer: HiLAB-Portugal
  • Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.
Buy product
Water Vapour Absorption Tester
Model: H052
Producer: HiLAB-Portugal
  • The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Martindale Abrasion Tester with 9 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.
Buy product
Lace to Eyelet Abrasion Tester with 6 stations
Model: H068
Producer: HiLAB-Portugal
  • Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.
Buy product
Whole Shoe Flexometer with 4 stations
Model: H009
Producer: HiLAB-Portugal
  • Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking
Buy product
Wear and Corrosion Apparatus
Model: H063
Producer: HiLAB-Portugal
  • Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Rubber abrasive machine-No.151
Model: Rubber abrasive machine-No.151
Producer: TESTEX-China
  • DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.
Buy product
Slip Resistance Tester
Model: H080
Producer: HiLAB-Portugal
  • A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube