Rub Fastness Tester with 2 stations

Martindale Abrasion Tester with 4 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.

Buy product

Water Vapour Permeability Tester

Model: H050

Producer: HiLAB-Portugal

The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...

Buy product

Heat Insulation Tester

Model: H028

Producer: HiLAB-Portugal

This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Rubber abrasive machine-No.151

Model: Rubber abrasive machine-No.151

Producer: TESTEX-China

DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

Blade Cutting Resistance Tester

Model: H073

Producer: HiLAB-Portugal

The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Velcro Fatigue Tester

Model: H019

Producer: HiLAB-Portugal

Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Buy product

Toe Caps Impact Tester

Model: H081

Producer: HiLAB-Portugal

Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
Changing tools (striker or clamping device) is a very easy and quick operation

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product